Water report · not indexed
What is in the water at 33410
3 public water systems serve this ZIP code in the federal records. Everything below comes from EPA monitoring data, and everything missing is named.
SEACOAST UTILITIES AUTHORITY
PWSID FL4501124 · FL · serves 97,552 people
PFAS and lithium
Sampled, nothing detected. Tested for 30 compounds under UCMR 5 with none found at or above its reporting limit. A reporting limit is the lowest concentration the method can measure, so this means “below that” rather than “zero”.
Health-based violations
No open health-based violation on record. This covers MCL, treatment technique and MRDL violations in SDWIS that have not been returned to compliance. It excludes monitoring and reporting violations, which are the large majority nationally, so this is not “no violations”, and SDWIS completeness varies by state.
Hardness
Too few readings to state a hardness. 2 station(s), 2 result(s). Below two stations and five results this page will not state a number: a median of two readings from one creek is not your water.
JUPITER PUBLIC WATER SYSTEM,TOWN OF
PWSID FL4501491 · FL · serves 94,929 people
PFAS and lithium
Sampled, nothing detected. Tested for 30 compounds under UCMR 5 with none found at or above its reporting limit. A reporting limit is the lowest concentration the method can measure, so this means “below that” rather than “zero”.
Health-based violations
No open health-based violation on record. This covers MCL, treatment technique and MRDL violations in SDWIS that have not been returned to compliance. It excludes monitoring and reporting violations, which are the large majority nationally, so this is not “no violations”, and SDWIS completeness varies by state.
Hardness
Median hardness 175 mg/L as CaCO₃, measured at 5 stations serving this system across 5 results, 2015-04-22 to 2017-05-10. Measured in the water source and distribution area, not at a tap, and not in your home.
PALM BEACH COUNTY WATER UTILITIES
PWSID FL4504393 · FL · serves 597,649 people
PFAS and lithium
9 compounds detected at or above the reporting limit under EPA’s UCMR 5 monitoring, across 28 samples.
| Compound | Highest detected | Samples | Most recent |
|---|---|---|---|
| PFOS | 0.02 µg/L | 4 | 8/8/2025 |
| 6:2 FTS | 0.013 µg/L | 1 | 11/6/2024 |
| PFOA | 0.009 µg/L | 4 | 8/8/2025 |
| PFPeA | 0.0077 µg/L | 4 | 8/8/2025 |
| PFHxA | 0.0065 µg/L | 4 | 8/8/2025 |
| PFHxS | 0.0064 µg/L | 4 | 8/8/2025 |
| PFBS | 0.0061 µg/L | 4 | 8/8/2025 |
| PFBA | 0.005 µg/L | 1 | 8/8/2025 |
| PFHpA | 0.0031 µg/L | 2 | 8/8/2025 |
A detection is a measurement, not a violation and not a health finding. EPA states that UCMR 5 results do not indicate compliance or non-compliance with any limit.
Health-based violations
No open health-based violation on record. This covers MCL, treatment technique and MRDL violations in SDWIS that have not been returned to compliance. It excludes monitoring and reporting violations, which are the large majority nationally, so this is not “no violations”, and SDWIS completeness varies by state.
Hardness
Median hardness 294 mg/L as CaCO₃, measured at 8 stations serving this system across 8 results, 2016-02-11 to 2019-11-18. Measured in the water source and distribution area, not at a tap, and not in your home.
What this report cannot tell you
Every figure describes water at a sampling point: a treatment plant, an entry point to the distribution system, or a monitoring station. None of it describes water arriving at your tap. Plumbing between the two can add lead and copper, and if your home was built before 1986 a test kit tells you something no federal dataset can.
Sources: EPA UCMR 5 occurrence (final release, frozen July 2026) · EPA SDWIS health-based violations · USGS and state monitoring via the Water Quality Portal · EPA Public Water System Service Area Boundaries v3. Compiled 2026-09-01.